Applications:

Recommended for both industrial and off-highway hydraulic systems. Other applications include: Machining centre headstocks, centralised lubrication systems, suspension units, tipping gear, jacks, PTOs, ETC.

Description

Triad 46 is part of a range of premium grade mineral based hydraulic oils with good anti-wear properties providing protection in the most demanding of systems. They are rust, corrosion and oxidation inhibited. Additionally, they contain an effective anti-foam additive to control foam and facilitate the rapid release of entrained air, therefore maximising hydraulic system efficiency.

Applications

Recommended for both Industrial and off highway hydraulic systems. Other applications include: machining centre headstocks, centralised lubrication systems, suspension units, tipping gear, jacks, PTOs, et cetera.

Performance Level & Physical Characteristics

See Technical Data Sheet.

Description

Triad 32 is part of a range of premium grade mineral based hydraulic oils with good anti-wear properties providing protection in the most demanding of systems. They are rust, corrosion and oxidation inhibited. Additionally, they contain an effective anti-foam additive to control foam and facilitate the rapid release of entrained air, therefore maximising hydraulic system efficiency.

Applications

Recommended for both Industrial and off highway hydraulic systems. Other applications include: machining centre headstocks, centralised lubrication systems, suspension units, tipping gear, jacks, PTOs, et cetera.

Performance Level & Physical Characteristics

See Technical Data Sheet.

Description

Multivis ADT DV 5W-30 is a synthetic technology engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils. The product uses a combination of synthetic base fluids and an advanced additive system to provide a balanced lubricant that delivers friction reduction, component protection and fuel efficiency. Multivis ADT DV 5W-30 has been developed to help combat the issue of Low Speed Pre-ignition (LSPI) which can cause damage to certain petrol engine types.

Multivis ADT DV 5W-30 provides the following benefits:

• Contributes to overall fuel efficiency
• Circulates rapidly from cold
• Strong oil film protects at high temperatures and under arduous work loads
• Ensures a high level of component cleanliness and operational efficiency

Applications

Recommended for use in engines where a lubricant of this viscosity and performance level is specified in handbooks, particularly Opel/Vauxhall Group petrol models, 1.4 and 1.0 turbo units, model year 2010 onwards.

Performance Levels

See technical data sheet

Description

Multivis CST SS 10W-40 is a semi-synthetic engine oil manufactured from advanced Group II and Group III base fluids and the latest additive technology. This grade is designed for use in petrol and diesel engines fitted to passenger cars and light commercial vehicles. Multivis CST SS 10W-40 will protect camshafts, critical valve gear and bearings from wear, even under severe cold start conditions, as well as controlling rust and corrosion.

Features

• Keeps components clean and the engine running efficiently
• Combats oxidation thickening, optimising fuel economy.
• Provides outstanding oil pressure, even at high temperatures

Applications

Multivis CST SS 10W-40 is recommended for use in 4-stroke petrol and diesel engines, including turbocharged and supercharged units, fitted in passenger cars and light commercial vehicles, where an oil of this type and specification is required. Multivis CST SS 10W-40 can also be used in ATVs (with dry clutches), horticultural equipment and generators.

Performance Levels
See technical data sheet.

Multivis CST ME 10W-30 and 15W-40 engine oils provide a high level of engine cleanliness and control the formation of high temperature lacquers and low temperature sludges. Powerful antiwear technology ensures maximum component life, together with protection from oxidation, rust and corrosion.

Features

• Outstanding Soot Handling
• Enhanced Sludge Dispersancy
• High levels of Piston Cleanliness
• Improved Anti-wear protection

Applications

Multivis CST ME 10W-30 and 15W-40 are engine oils are suitable for use in passenger cars, light commercial vehicles, etc. where an oil of this type and specification is required.

Performance Levels

API SM/SN/CF

(Formerly known as – Multilife C-TWO 5W-30)

Description:

Multivis ADT C2 5W-30 is a mid-SAPS synthetic based multigrade engine oil formulated to meet the superior performance and fuel efficiency requirements of engines requiring low viscosity oils for gasoline and diesel engine applications.
Multilife C-TWO 5W-30 has been developed for use in Euro IV, V and VI compliant vehicles with diesel particulate filters (DPFs) and other after-treatment devices.

Multivis ADT C2 5W-30 provides:
1. Increased engine efficiency, output and improved fuel economics.
2. Excellent cold starting characteristics, reducing noise and wear.
3. Improved flow rates to bearings at low temperatures and increased film strength at high temperatures.
4. Better high temperature operation and anti-sludge control.
5. Low levels of volatility.
6. Better thermal stability, improved engine cleanliness.
7. Mid-SAPS (Sulphated Ash, Phosphorus and Sulphur) product, for improved DPF (Diesel Particulate Filter) performance.

Recommended for modern petrol and passenger car high performance diesel engines, requiring a low viscosity ACEA C2 Type 5W-30 oil. Manufacturers and models/engines include:

Citroen HDi (FAP), HDi Biturbo, V6 (FAP)
Honda CTDi DPF
Mitsubishi Selected models with DPF’s
Peugeot HDi FAP, HDi Biturbo
Toyota Auris D-4D
Ford Duratorq TDCi

Performance Levels
See technical data sheet.

SYNTHETIC TECHNOLOGY – LOW SAPS

Description

Multivis ADT C1 5W-30 is a low-SAPS, synthetic technology engine oil formulated to meet the demands and fuel efficiency expectations of the latest petrol and diesel engines, where a low viscosity oil is required.

Multivis ADT C1 5W-30 has been formulated to protect sensitive exhaust after-treatment devices, particularly those fitted with diesel particulate filters (DPFs), helping to ensure efficient and trouble-free operation.

Multilivis ADT C1 5W-30 provides:

1. Increased engine efficiency, output and improved fuel economics.
2. Excellent cold starting characteristics, reducing noise and wear.
3. Outstanding high temperature operation and anti-sludge control.
4. Low levels of volatility, minimised oil consumption.
5. Better thermal stability, improved engine cleanliness and component longevity.

Applications

Recommended for the latest low emission passenger car high performance petrol and diesel engines that require ACEA C1 SAE 5W-30 lubricants. Manufacturers include: Ford, Mazda, Land Rover, Range Rover and Mitsubishi.

Note: Do not mix with oils that are not ACEA C1 compliant as this will adversely affect after-treatment devices and the operational efficiency of the engine.

Performance Levels & Physical Characteristics

See Technical Data Sheet

Multivis ADT C4 5W-30 is a low-SAPS, synthetic technology multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of engines requiring low viscosity oils for gasoline and diesel engine applications. Multivis ADT C4 5W-30 is compatible with engine units fitted with sensitive diesel particulate filters (DPFs) and 3-way catalysts (TWC). Advanced additive technology provides long-term benefits including reduced wear on critical valve-train components in multi-valve engines, including camshafts and hydraulic cam-followers. Multivis ADT C4 5W-30 provides: Increased engine efficiency, output and fuel economy. Excellent cold starting characteristics, reducing noise and wear. Reduced exhaust gas back pressure. Improved flow rates to bearings at low temperatures and increased film strength at high temperatures. Better high temperature operation and anti-sludge control. Low levels of volatility. Better thermal stability, improved engine cleanliness. Low-SAPS (Sulphur, Ash, Phosphorus) product, for improved DPF (Diesel Particulate Filter) performance. Applications Recommended for the latest petrol and passenger car diesel engines, including turbo and supercharged versions requiring a low viscosity 5W-30 oil, specifying one of the performance levels listed below. Performance Levels ACEA C3, ACEA C4 RN0720 MB 226.51